The Honeywell VisionPro 8000 is a smart, Wi-Fi enabled thermostat designed for home comfort. It allows remote temperature control and energy savings through scheduling. This guide covers installation, setup, and troubleshooting.
Overview of the Vision Pro 8000
The Honeywell VisionPro 8000 is a touchscreen programmable thermostat, offering advanced control over home heating and cooling systems. It supports various setups including up to 3 heat/2 cool heat pumps and 2 heat/2 cool conventional systems. This thermostat features Wi-Fi connectivity, enabling remote control via a mobile app. It provides options for On, Auto, and Circulating fan settings, allowing users to customize their comfort. The VisionPro 8000 also includes a menu for accessing schedules, equipment status, and installer options. Its compatibility with RedLINK technology further enhances its flexibility. The device is designed for both residential and commercial applications, with a focus on user-friendly interface and energy efficiency. Its features include alerts for maintenance and extreme temperatures, ensuring optimal performance.
Preparing for Installation
Before installing the Vision Pro 8000, ensure the power is off. Then, separate the old thermostat from its wallplate and prepare for the new mounting.
Separating the Wallplate
To begin the installation of your Honeywell Vision Pro 8000, the first crucial step involves separating the existing thermostat from its wallplate. This process is typically straightforward but requires a gentle approach to avoid any damage. Begin by grasping the top and bottom edges of the thermostat unit firmly. Then, carefully pull the thermostat directly away from the wall. You might encounter slight resistance, but the thermostat should detach without excessive force. Avoid twisting or bending the unit during this process. After separation, set the thermostat aside safely while you prepare the new wallplate. This ensures that the delicate components of the thermostat are protected from accidental impacts or misplacement during the subsequent installation steps. Always handle the thermostat with care throughout the installation process.
Mounting the Wallplate
After separating the thermostat, prepare to mount the wallplate. Position the new Honeywell Vision Pro 8000 wallplate on the wall, ensuring it’s level. For drywall, drill 3/16-inch holes; for plaster, use 7/32-inch holes. Insert wall anchors into the drilled holes if necessary, then align the wallplate’s screw holes. Secure the wallplate to the wall using the provided screws, tightening them firmly but not over tightening. Make sure the wallplate is flush against the wall and stable. Double-check the alignment before proceeding. Proper mounting is essential for the thermostat to sit correctly and function effectively. After mounting, ensure any excess wire is pushed back into the wall opening and use non-flammable insulation to plug the opening, if necessary.
Wiring the Thermostat
Proper wiring is crucial for the Vision Pro 8000. This section covers power connection, conventional, and heat pump system wiring configurations, ensuring correct functionality and safety. Follow these instructions carefully.
Power Connection
The Honeywell VisionPro 8000 requires a 24VAC power supply for proper operation. Connect the common wire from the secondary side of your cooling transformer to the ‘C’ terminal on the thermostat’s wallplate. This connection is essential for powering the thermostat. You can use either the included batteries for primary or backup power. Ensure that any excess wire is pushed back into the wall opening and that the opening is sealed with non-flammable insulation for safety and to prevent drafts. It is crucial to establish the power connection properly before proceeding with any other wiring steps. For systems with two transformers, ensure proper connections for both heating and cooling power supplies, noting that the common wire connection remains the same. Improper power connections can cause malfunctions or damage to the thermostat.
Conventional System Wiring
For a conventional system, connect the heating power wire to the ‘Rh’ terminal or the ‘R’ terminal if using one transformer. The cooling power wire goes to the ‘Rc’ terminal, which is often jumpered to the ‘Rh’ terminal if only one transformer is used. The heat relay wire connects to the ‘W’ terminal, and the compressor contactor wire goes to the ‘Y’ terminal. The fan relay wire should be connected to the ‘G’ terminal. Ensure the 24VAC common wire is connected to the ‘C’ terminal. Optional outdoor/remote sensor can also be connected. Carefully follow terminal designations, and use the provided wiring guide for accuracy. When dealing with two transformers, ensure both power supplies are connected correctly, and that appropriate jumpers are in place. Incorrect wiring can lead to system malfunction or damage.
Heat Pump System Wiring
For heat pump systems, connect the power wire to the ‘R’ terminal, and jumper it to the ‘Rc’ terminal. The changeover valve wire should be connected to the ‘O/B’ terminal, selecting the appropriate setting depending on your system. The compressor relay wire should be connected to the ‘Y’ terminal. Connect the fan relay wire to the ‘G’ terminal. The 24VAC common wire must be connected to the ‘C’ terminal. If your system has auxiliary heat, connect the auxiliary heat wire to the ‘Aux’ or ‘E’ terminal. Make sure to follow the wiring guide for your specific heat pump model. Double-check all connections to prevent any short circuits or system malfunctions. Ensure to use the correct labels and wiring diagram for the system configuration.
Connecting to Wi-Fi
After installation, the thermostat will prompt you to connect to a Wi-Fi network. This enables remote control and access via the Total Connect Comfort app. Follow the on-screen instructions.
Initial Wi-Fi Setup
After completing the installer setup, your Honeywell VisionPro 8000 will display a prompt to connect to a Wi-Fi network. Select ‘Yes’ to begin the process. The thermostat will then scan for available networks and display a list on the screen. Choose your desired network from the list, and enter the password if required. If your network is hidden, you will need to manually enter the network name and security settings. The thermostat will attempt to connect to the chosen Wi-Fi network. Once successfully connected, a confirmation message will appear, and the thermostat will display its home screen. If the connection fails, the screen will display troubleshooting tips.
Connecting to a Hidden Network
If your Wi-Fi network name is not visible in the list of available networks, you will need to manually connect to it. Begin by accessing the menu on the thermostat and selecting ‘Wi-Fi Setup’. Then, choose the option to add a hidden network. The thermostat will prompt you to enter the exact name of your network (SSID). Ensure that you enter it correctly, paying attention to capitalization and spacing. Next, select the security type used by your network (e.g., WPA2, WEP) and enter the corresponding password. Once all information is entered, the thermostat will attempt to connect to the hidden network. A successful connection will be confirmed, and the home screen will be displayed.
Installer Setup and Testing
Accessing installer options allows for configuration of system type and preferences. An installer test verifies proper functionality after setup. This ensures the thermostat operates correctly.
Accessing Installer Options
To access the installer options on your Honeywell VisionPro 8000 thermostat, begin by touching the “Menu” button on the device’s screen. This action will display a list of available settings and options. From this menu, select “Installer Options,” which is typically identified by a wrench or similar icon. Once selected, the thermostat will prompt you to enter a password. This password is often a date code, which can be located in the thermostat’s documentation. After successfully entering the correct password, you will gain access to the installer setup menu. This menu allows you to configure various aspects of the thermostat’s operation, including system application, and other preferences. Navigating this menu is crucial for tailoring the thermostat to your specific HVAC system and needs. Remember that changes made in this mode can affect the thermostat’s performance, so proceed carefully.
Performing an Installer Test
After accessing the installer options, you can perform an installer test on your Honeywell VisionPro 8000. This test is crucial to ensure the thermostat is correctly wired and communicating with your HVAC system. Navigate to the “Installer Test” option within the installer menu. The thermostat will then guide you through a series of tests, activating each component of your heating and cooling system individually. Observe and verify if each stage, such as the fan, compressor, and heat stages, is functioning as expected. If any component fails to activate or does not respond correctly, it indicates a wiring or configuration issue that needs to be addressed. The installer test helps pinpoint these problems, ensuring your thermostat operates efficiently and reliably. This step is essential for a successful installation.
Additional Information
This section provides troubleshooting tips for connection issues and other helpful information. Refer to the manual or Honeywell support for further assistance with your Vision Pro 8000.
Troubleshooting Connection Issues
If your Honeywell VisionPro 8000 fails to connect to Wi-Fi, first verify your network name and password are correct. Ensure your router is functioning and broadcasting a 2.4 GHz signal. The thermostat is compatible with 802.11 B/G/N networks. Check for strong Wi-Fi signal strength near the thermostat’s location; move closer to the router if needed. If using a hidden network, follow the specific steps to connect. The device displays a “Connection Failed” message when unsuccessful; press the button for tips. Incorrect MAC or CRC entries during registration could also be the problem. Make sure that you have a Total Connect Comfort account. If problems persist, visit Honeywell’s customer support website or call for further assistance.